Speco D16CX Operation Instruction Manual Download Page 82 | Manualshive

Page: 82 / 93

background image

Operation Instruction

74

NOTE: The file size for clip copy is limited to 30GB. When copying video clips larger than 2GB, the video clips

will be save in units of 2GB. For example, 3 individual 2GB files will be created when saving a 6GB video
clip. However, the file size for the One-Touch Clip Copy is limited to 2GB.

You can use other functions on the DVR while video is being backed up. To do this, highlight the

Close

button and

press the

button. You can return to the

Clip-Copy

screen at any time to check the progress.

You do not need to install any special software on your personal computer to review the video clips. Refer to Speco
Central II manual for instructions on how to review video clips you have copied.

NOTE: During Clip Copy, you cannot shut the system down, clear data on the storage device, or format the

storage device.

CAUTION: Do NOT disconnect the USB cable or the power from the external drive while copying

video clips. If the external drive is shut down or the USB cable is disconnected while
copying video clips, THE DVR SYSTEM MAY NOT WORK NORMALLY OR THE EXTERNAL
DRIVE COULD BE DAMAGED, and you will get an error message the next time you try
to copy video clips. You will need to power down the DVR and restart it to get rid of the
error message. Once the file system of the USB hard disk drive has been corrupted, this
error message cannot be dismissed. Even after restarting the DVR it may automatically
restart while preparing to clip copy. You must recover the file system using the recovery
program, or you must reformat the hard disk drive.

Print

You can print images on a printer. Connect a PostScript™ printer, or external hard disk drive or flash drive to one of
the USB ports.

Figure 54: Print screen.

Highlight the box beside

Printer Model

and press the

button. Selecting

PostScript Printer

will print images on a PostScript™ printer connected to

the DVR. Selecting

File Printer

will save the current image as a PDF file on

an external USB hard disk drive or flash drive.

NOTE: Images saved as PDF files can be printed on any printer connected
to your PC.

Highlight the box beside

Paper Size

and press the

button. You can select

the paper size.

Once you have selected the printer model and paper size, highlight the

Print

button and press the

button. A message

appears asking you if you want to print the current image. Highlight the

Continue

button and press the

button to print.

NOTE: If your printer only supports an LPT connection (parallel), use an LPT to USB converter cable. The printer

cable is not provided.

«
...
80
81
82
83
84
...
»

Summary of Contents for D16CX






























































































Reviews:

No comments

Related manuals for D16CX

Brand: Magnavox Pages: 94

Brand: Robotics Technologies Pages: 16

Brand: Idis Pages: 16

Brand: Q-See Pages: 7

Brand: Q-See Pages: 3

NHDR-3104AHD-II

Brand: Novus Pages: 52

Brand: VDICI Pages: 71

Brand: Arirang Pages: 20

Brand: Bolide Pages: 34

Brand: CAME Pages: 48

Brand: PI Manufacturing Pages: 165

Brand: Advanced Technology Video Pages: 22

DIRECTV SD-DVR120

Brand: Hughes Pages: 176

Brand: Eclipse Pages: 254

Brand: Swann Pages: 121

4ch D1 & 2ch SDIDigital Video Recorder

Brand: Swann Pages: 60

VMAX A1 DW-VAONE 1612TB

Brand: Digital Watchdog Pages: 113

Brand: Telefunken Pages: 14

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands