Speco D16CX Operation Instruction Manual Download

Page: 52 / 93

Operation Instruction

Selecting

DHCP

from the Type and highlighting

Save

button reads the current IP address of the DVR configured by

DHCP (Dynamic Host Configuration Protocol) network.

Highlight

Auto

(Default) and press the

button to toggle between On and Off. When it is On, the DVR will obtain

the IP address of the DNS server automatically.

NOTE: Selecting

Auto

will only be enabled when the DVR is configured for DHCP or an ADSL network.

Selecting

ADSL (with PPPoE)

allows you to set up the ADSL network.

Highlight the box beside

and press the

button. A virtual keyboard appears allowing you to enter the ID for ADSL

connection.

Highlight the box beside

Password

and press the

button. A virtual keyboard appears allowing you to enter the

password for ADSL connection.

NOTE: Entering

the

and

Password

and highlighting

reads the current IP address of the DVR configured

by the ADSL network.

If the DVR is configured for DHCP or an ADSL network, the IP address of the DVR might change whenever
the unit is turned on.

DVRNS

Figure 31: Network – DVRNS setup screen.

Highlight

Use DVRNS

and press the

button to toggle between On and Off.

NOTE: DVRNS is the technology that automatically sets up your DVR to work seamlessly for remote viewing

via your network internet connection. For DVRNS to work, naming your DVR will be required.

Highlight the box beside

DVRNS Server

and press the

button. A virtual keyboard appears allowing you to enter

the IP address or domain name of the DVRNS server.

NOTE: You will need to get the IP Address or domain name of the DVRNS Server from your network administrator.

You can use the domain name instead of IP address if you already set up the DNS Server when setting
up the LAN.

Highlight the box beside

Port

and press the

button. Set the port number of the DVRNS server using the

and

Down

arrow buttons to increase or decrease the numbers.

Highlight the box beside

DVR Name

and press the

button. A virtual keyboard appears allowing you to enter the

DVR name to be registered on the DVRNS server.

Highlight the

Check

box and press the

button to check whether or not the name you entered can be used.

Summary of Contents for D16CX






























































































Search results

Summary of Contents for D16CX

Reviews:

Related manuals for D16CX

Brands by name

Popular brands

Speco D16CX, Operation Instruction Manual

Search results

Summary of Contents for D16CX

Reviews:

Related manuals for D16CX

Brands by name

Popular brands