Digital Video Recorder
37
PTZ
Figure 24: Camera – PTZ setup screen.
NOTE: You will only be able to set up PTZ devices if the PTZ port is set to RS232 or RS485.
Highlight the box in the
Product
column for the PTZ camera you wish to configure
and press the
button. A list of PTZ devices appears. Select your camera from
the list and press the
button. You will need to connect the camera to the RS232
or RS485 connector on the back of the DVR following the camera manufacturer’s
instructions.
You can assign IDs to each camera by highlighting the box under the
ID
heading and pressing the
button. Change the
number by highlighting it and using the
Up
and
Down
arrow buttons to increase and decrease the number. The PTZ
ID number can be set from 0 to 256.
Highlight the
Setup…
box and press the
button. The Port Setup window appears.
Configure the port’s setting based on the PTZ camera manufacturer’s instructions.