Operation Instruction
56
Live Monitoring Menu
Login/Logout
Selecting
(Login) in the Live Monitoring menu accesses the Login screen, and you will be asked to select a User
and enter the password to log into the system. Selecting
(Logout) in the Live Monitoring menu displays the Logout
screen asking you to confirm whether or not you want to log out the current user
.
Display
Full Screen:
Selecting
(Display)
→
(Full Screen) and choosing the camera number button displays the
selected camera full screen. It is the same as pressing the individual camera buttons on the front panel or clicking
the left mouse button on a camera image when in one of the multiview formats (i.e., 2x2, 1P5, 1P7 or 3x3). Clicking
the left mouse button on the screen again returns to the previous display mode.
PIP, 2x2, 1P5, 1P7, 3x3:
Selecting
(Display)
→
,
,
,
,
or
(PIP, 2x2, 1P5, 1P7 or 3x3) displays
the cameras in the selected multiview screen mode (PIP, 2x2, 1P5, 1P7 or 3x3). Selecting each display mode is the
same as scrolling the mouse wheel up and down when in one of the multiview formats (i.e., 2x2, 1P5, 1P7 or 3x3).
NOTE: In the 1P5 or 1P7 display mode, the main channel indicates the channel displayed on the large screen
which is displayed in the top-left. You can select the camera you want to display on the main channel
screen. Select a channel on the screen and click the right mouse button to display the Camera Menu.
Selecting
Go To Main
swaps the selected channel with the main channel. This function is supported only in
the 1P5 and 1P7 display modes and can be activated from any of channel screens except the main channel
screen.
Camera OSD, Status OSD:
Selecting
(Display)
→
Camera OSD
or
Status OSD
toggles Camera OSD
or Status OSD On and Off.
Previous Group, Next Group
Selecting
or
(Previous Group or Next Group) in the Live Monitoring menu moves to the previous or next page.
Freeze
Selecting
(Freeze) in the Live Monitoring menu will freeze the current image on the screen until you select
again.
It is the same as pressing the
(Play/Pause) button. Pressing any button except for the
MENU
button while in the
Freeze mode can also exit the Freeze mode. While in the Freeze mode, the icon
displays in bottom-left corner if
Freeze
is selected in the Display setup screen (OSD tab).
Alarm
Selecting
(Alarm) in the Live Monitoring menu resets the DVR’s outputs including the internal buzzer during an alarm.
It is the same as pressing any button on the front panel when the alarm is activated.
Digital Deterrent
Selecting
(Digital Deterrent) in the Live Monitoring menu displays the following setup screen and allows the DVR
to play manually.
Highlight the box beside
Source name
and press the
button to select the source
file to play. Highlighting
Trigger
plays the selected file as the digital deterrent.
Panic
Selecting
(Panic) in the Live Monitoring menu starts panic recording of all cameras, and selecting
again stops
panic recording.
