Speco D16CX Operation Instruction Manual Download

Page: 18 / 93

Operation Instruction

Arrow Buttons

These buttons are used to navigate through menus and GUI. You can also use them to change numbers by highlighting
a number in the menu and using the

and

Down

arrow buttons to increase or decrease the number’s value.

When in the PIP display format, pressing the

and

Down

arrow buttons moves the position of the small screen

counter-clockwise and clockwise.

Pressing the

Left

and

Right

buttons moves through screen pages in the Live Monitoring mode and Search mode.

Menu Button

In the Live Monitoring mode and Search mode, pressing the

button displays the menu icons on the right edge

of the screen.

Playback Buttons



Rewind:

Pressing the

button plays video backward at high speed. Pressing the button again toggles the playback

speed from

and



Play/Pause:

Pressing the

button plays back video at regular speed and pressing the button again pauses video.

The screen displays when the DVR is in the Pause mode and the screen displays when the DVR is playing back
video.



Fast Forward:

Pressing the

button plays video forward at high speed. Pressing the button again toggles the

playback speed from

and



Stop:

Pressing the

button stops playback and enters the Live Monitoring mode.



Backward:

When in the pause mode, pressing the

button moves to the previous image.



Forward:

When in the pause mode, pressing the

button moves to the next image.

In the Live Monitoring mode, pressing any playback button enters to the Search mode.

Alarm Button

Pressing the

ALARM

button resets the DVR’s outputs including the internal buzzer during an alarm.

Layout Button

Pressing the

LAYOUT

button toggles between different display formats. The available formats are: 3x3, 1P7, 1P5,

2x2 and PIP.

Zoom Button

Pressing the

ZOOM

button zooms the current image on the screen. A PIP with a rectangle temporarily displays showing

what area of the screen has been enlarged. You can use the arrow buttons to move the rectangle to another area.

PTZ Button

Pressing the

PTZ

button enters the PTZ (Pan/Tilt/Zoom) mode which allows you to control properly configured cameras.

Enter Button

The

(Enter)

button selects a highlighted item or completes an entry that you have made during system setup. This

button is also used to enter the Cameo mode in the Live Monitoring mode or Search mode.

Summary of Contents for D16CX






























































































Search results

Summary of Contents for D16CX

Reviews:

Related manuals for D16CX

Brands by name

Popular brands

Speco D16CX, Operation Instruction Manual

Search results

Summary of Contents for D16CX

Reviews:

Related manuals for D16CX

Brands by name

Popular brands