www.spacelabshealthcare.com
1 - 1 4
U
L T R A V I E W
D
I G I T A L
T
E L E M E T R Y
-
S
E R V I C E
M
A N U A L
I
N T R O D U C T I O N
Each receiver module operates within a specific frequency band. A
receiver module can be tuned to any patient-worn transmitter’s
channel (operating frequency), provided the channel falls within the
same frequency band.
Monitor options provide 24 hours of trended data that can be
displayed in 2-, 6-, 12-, and 24-hour segments. Data is stored in 1-
minute resolution.
The receiver module counts as 1 or 2 parameters when computing
parameter capacity for monitors:
•
1 displayed ECG lead = 1 parameter
•
2 displayed ECG leads = 2 parameters
Signal reception requires the use of a different frequency (channel)
assigned to each receiver. In the U.S.A., these transmission
frequencies are regulated by the Federal Communications
Commission (FCC). In other countries, these transmissions are
regulated by the local communications authority.
Telemetry use is managed through the operation of the Ultraview
Care Network Module Configuration Manager. Refer to the
Module
Configuration Manager System Administration Guide
(P/N 070-
1245-xx), located on CD-ROM P/N 084-1101-xx.
The high level analog output has the following characteristics:
1
The 91341/91343/91347 ECG telemetry is used in conjunction with
the Multi-Band Active Antenna system to down-convert 1400
MHz emissions into the 600 MHz band for detection.
ECG 1
Used for defibrillator synchronization
Connector:
3-conductor TT phone jack
Dynamic Range
±5 mV, ±10% (rti)
Gain
ECG × 1000, ±5%
Bandwidth
0.05 to 30 Hz, ±10% (-3 dB)
Table 1-7 Transmitter/Receiver Compatibility
Transmitter
Model
Operating Frequency
Range (MHz)
Compatible
Receiver Module
90341-05
90343-05
90347-05
608 - 614
90478-Q
90343-16
202.65 - 205.15
90478-N, 90478-O
91347
91341
91343
1395 - 1400
90478-T
91347
91341
91343
1
1427 - 1431.5
90478-V
