RIPPLE PUMPS INSTRUCTIONS MANUAL mod. N. 1 FAR - s/n V-0067 / V-0068 – Machinery
world
C.2009573
S1
3. SAFETY
3.1 GENERAL INFORMATION ON SAFETY
The following notes give information on how to use and service SOREN rotary
pumps safely.
To work under safe conditions please follow SOREN operating, maintenance
and setting up procedures.
SOREN machines are designed to give operators limited access to high-risk
zones, even though specially trained personnel have sufficient access for
inspection and maintenance works.
The risk zones are protected.
The protection is fastened with various types of devices depending on how
often it has to be removed. No matter what type of fixture is used,
the presence
of a safety guard and relevant danger signals warn the operator of the
risk.
Never use or test the machines without one of its safety guards, unless
supervised by an authorized and specially trained person; be extremely careful
to avoid risk.
•
DEFINITIONS
DANGER !
The use of the word “danger” always means that there is an immediate
danger with every possibility of causing serious harm to personnel or death if
suggested instructions and precautions are not followed.
WARNING !
The use of the word “warning” means there are dangers or unsafe
procedures that could cause serious harm to personnel or death if suggested
instructions and precautions are not followed.
ATTENTION !
The use of the word “attention” means the possibility of danger or unsafe
procedures that could cause moderate harm or damage to the product or
system if suggested instructions and precautions are not followed.
3.2 SAFETY COMES FIRST
SOREN rotary pumps are designed and produced with all due consideration
and attention for safety standards in force.
You should always study and comply with the safety norms described in this
manual for your safety and that of others.
3.3 WORKING AREA
A working area all around the machine should be reserved and marked off by a
safety barrier or marked on the ground by a warning notice.
Only the operator or other authorized personnel should enter this working zone.
No tooling or other equipment should be left in the working zone.