RIPPLE PUMPS INSTRUCTIONS MANUAL mod. N. 1 FAR - s/n V-0067 / V-0068 – Machinery
world
C.2009573
4. INSTALLATION
4.1 RECEIPT AND INSPECTION
SOREN tests and inspects its machines before they are shipped, and is careful
to pack them in the best way; it cannot however guarantee for the condition of
the machine when it arrives.
We therefore recommend Clients to check carefully upon unpacking it, making
sure that all the material listed in the delivery note is included.
If parts are missing or the equipment is damaged, the Client should immediately
send written notification of claim for damages to the carrier.
4.2 PREMISES WHERE IT IS USED
Set up the rotary pump with enough space around it for cleaning and
maintenance, keeping in consideration the connections for required services.
There must be sufficient lighting in the premises.
The floor must be level enough to stand the machine and well drained.
Regulate the adjustable feet so that the machine is on a perfect level.
4.3 ELECTRIC CONNECTIONS
•
See paragraph : 2.4 "Specifications – Fluids and electric energy"
•
Connections must only be done by specialized and authorized personnel, in
conformity to standards in force and complying with rating. Check to see that
the agitator shaft rotates in the direction of the arrow.
4.4 SERVICE FLUID CONNECTIONS
•
See paragraph : 2.4 "Specifications – Fluids and electric energy"
WARNING !
Avoid using the rotary pump to support the piping connected to it.
Piping must be held by its own supports to avoid stress on the unions.
Use wide radius bends with the right diameter to prevent excessive pressure
at the outlet.