41
Set the following SDP (Session Description Protocol) in the Wowza Streaming Engine.
For details about configuration, refer to the instructions for the Wowza Streaming Engine.
The unit does not feature a function for sending SDP.
v=0
s=Vision Exchange Streaming Output
i=Vision Exchange Streaming Output
o=- 0 0 IN IP4
XXX.XXX.XXX.XXX
c=IN IP4
XXX.XXX.XXX.XXX
m=video 5004 RTP/AVP 105
a=rtpmap:105 H264/90000
m=audio 5006 RTP/AVP 98
a=rtpmap:98 mpeg4-generic/48000/2
a=fmtp:98
mode=AAC-hbr;profile-level-id=1;object=2;streamType=5;sizelength=13;indexlength
=3;indexdeltalength=3;config=1190
a=ptime:20
Notes
Enter the IP address of the Wowza Streaming Engine in
XXX.XXX.XXX.XXX
.
The 5004 in “m=video 5004 RTP/AVP 105” is the port number of the video set on the main
unit.
The 5006 in “m=audio 5006 RTP/AVP 98” is the port number of the audio set on the main
unit.
Connection and control using RTSP
To enable RTSP connections, on the [Setting] screen – [Streaming Output] page, place a check
mark in [Enable RTSP Connection].
Also, specify the following streaming output URI in the application that will receive the stream.
Specify settings using the configuration method of the application being used.
rtsp://
host_name:port_number
/media/video1
Enter the IP address of the main unit acting as the streaming output source for
host_name
.
Main Unit/Pod
Layer 2 switch
Wowza Streaming
Engine
Lecture capture device
