Op
erat
io
n
Output Services
26
2
Touch the [Same Picture] or [Different Pictures]
buttons to select the type of templates you will use.
To change the print size, touch the [Other Sizes]
button and select the desired size.
3
Touching the category tabs will switch to the next
category of templates.
If the category tabs do not fit on one screen,
touching [More Categories] will switch to the next
screen of category tabs.
Note
The [More Categories] button appears when 6 or
more templates have been loaded on the [Menu
Display] list on the [Templates] tab on the
Administration screen.
For details, see “[Templates] Tab” (page 41).
4
Select the desired template, and then touch the
[OK] button.
5
Perform one of the following procedures:
• To print stored pictures
The pictures on the media inserted into the unit
are loaded. Proceed to the next step.
• To scan pictures and print them
Steps 1 to 6 of “Scanning Pictures” (page 10)
6
Touch the pictures to be combined for printing, then
touch the [OK] button.
To cancel the selection, touch the picture again.
If all the pictures cannot be displayed on one page,
touch the [
b
] or [
B
] button to display more pages.
At this step, you can also perform the following
procedure:
• Touch the [Go Back] button to return to the
screen in step 2 and select a different template.
The pictures and template appear.
7
Specify the layout of the composite picture.
If all the pictures cannot be displayed, touch [
b
] or
[
B
] to display the previous or next page.
1
To select the template of the composite picture
touch the picture in the screen and touch the
[Edit/Magnify] button.
The picture editing screen appears.
Category Tab
Print Size
