Location and Function of Parts and Controls
66
*1 Adjustment of SUB CONTROL is the same.
*2 When a component signal (480/60I or 480/60P) is input
and the COMPONENT LEVEL is set to SMPTE, this can
be switchable.
*3 When a BKM-227W is installed, the number of the input
connector is increased.
*4 When a BKM-229X is installed, the number of the input
connector is increased.
*5 When a BKM-220D, BKM-243HSM or BKM-250TGM
is installed, the signal can be input.
*6 When a BKM-243HSM or BKM-250TGM is installed, the
signal can be input.
*7 Only the interlace signal is input.
*8 The signal can operate with PRESET 2 to 6 (see page 93).
*9 For details on the input signal available for the multi
display, see “For the multi display” (page 95).
*10 The signal cannot operate with PRESET 7 and 8 (see
page 93).
*11 The signal can only operate with PRESET 1 (see page 93).
*12 The signal can only operate with PRESET 6 (see page 93).
*13 When a BKM-256DD is installed, the number of the
input connector is increased.
*14 When a BKM-250TGM is installed, the signal can be
input.
(You can also use BKM-250TG with a serial number
7100001 or later.)
*15 3D display mode is available when selecting 3D in 2D/3D
SELECT.
*16 Available when selecting 2D in 2D/3D SELECT.
*17 Displays in 2D display mode when selecting SIDE BY
SIDE in DISPLAY LAYOUT.
*18 When COLOR SPACE is set to OFF, this can be switchable.
