Adjustment Using the Menus
87
REMOTE menu
HOROPTER
CHECK
Changes display formats in monitoring
left/right input signals. This helps to
differentiate between left and right
signals.
•
NORMAL:
Displays video signals.
•
BLUE:
Displays video signals as RGB
blue color component.
•
RED:
Displays video signals as RGB
red color component.
•
MONO:
Displays video signals as
grayscale image.
•
BLACK:
Displays black signals. (No
video signals)
FLIP H
Changes display patterns (normal/
horizontally reversed display) in
monitoring left/right input signals.
•
OFF:
Deactivates the reversing
function.
•
LEFT:
Horizontally reverses left
signal.
•
RIGHT:
Horizontally reverses right
signal.
PAYLOAD ID
Displays the channel assign information
of payload ID superimposed on input
signals from the IN (INPUT)-1 and IN
(INPUT)-2 connector on BKM-
250TGM. Going out of the 3D
SETTING menu renews channel assign
information.
•
-:
Payload ID is not superimposed on
signals.
•
x:
Channel assign information is
detected as Link-3 or Link-4.
•
LEFT:
Channel assign information is
detected as Link-1.
•
RIGHT:
Channel assign information
is detected as Link-2.
Payload ID is only available when
DUAL or AUTO2 is selected in 3D
SIGNAL FORMAT.
2D/3D DISPLAY
Sets the on-screen indication of the
display mode currently viewed.
Selecting AUTO or ON displays “2D” or
“3D” at the top center of the screen
according to the display mode selected.
•
AUTO:
“2D” or “3D” is displayed for
about five seconds after switching
between the 2D and 3D display
mode.
•
ON:
“2D” or “3D” is always
displayed.
•
OFF:
The display is hidden.
Submenu
Setting
Submenu
Setting
PARALLEL REMOTE
Selects the PARALLEL REMOTE
connector pins for which you want
to change the function.
You can assign various functions to
pins 1 to 4 and pins 6 to 8. The
following lists the functions you
can assign to the pins.
• – – – (“– – –”: No function is
assigned.)
• COMPOSITE
• Y/C
• RGB
• COMPONENT
• DVI
• HD15
• OPTION A-1
• OPTION A-2
• OPTION B-1
• OPTION B-2
• OVERSCAN
• FULL
• NORMAL
• NATIVE
• 4:3
• 16:9
• TALLY G
• EXT SYNC
• BLUE ONLY
• MONO
• MIRROR IMAGE
• 2D/3D SELECT
• CHECKERBOARD
• L/R SWITCH
• HOROPTER CHECK
• DISPARITY SIM.
Note
If you use the PARALLEL
REMOTE function, you need to
connect cables. For more details,
see page 92.
SERIAL REMOTE
Selects the mode to be used.
•
OFF:
SERIAL REMOTE does
not function.
•
RS-232C:
The monitor is
controlled by the command
of RS-232C.
•
ETHERNET
: The monitor is
controlled by the command
of Ethernet.
PA R A L L E L R E M O T E :
S E R I A L R E M O T E :
xxxxxxx
M O N I T O R :
C O N N E C T I O N :
REMOTE
