Location and Function of Parts and Controls
64
To display the names of functions assigned to the
function buttons
When the menu is not displayed and the button is
pressed, the function selected in FUNCTION
BUTTON SETTING of the USER CONFIG menu
is displayed on the side of the F1 to F4 button.
j
Input select buttons
Press the button to monitor the signal input to each
connector.
A-1, A-2, B-1 and B-2 buttons are used when an
optional input adaptor has been installed in the option
port.
COMPOSITE button:
to monitor the signal through
the COMPOSITE IN connector
Y/C button:
to monitor the signal through the Y/C IN
connector
RGB button:
to monitor the RGB signal through the
connectors for the R/G/B signal input
COMPONENT button:
to monitor the component
signal through the connectors for Y/P
B
/P
R
signal input
A-1 button:
to monitor the signal from connector
1
of the input adaptor installed in the option port A or R/
G/B signal from BKM-229X/BKM-256DD installed
in the option port A
A-2 button:
to monitor the signal from connector
2
of the input adaptor installed in the option port A or Y/
P
B
/P
R
signal from BKM-229X/BKM-256DD
installed in the option port A
B-1 button:
to monitor the signal from connector
1
of the input adaptor installed in the option port B or R/
G/B signal from BKM-229X/BKM-256DD installed
in the option port B
B-2 button:
to monitor the signal from connector
2
of the input adaptor installed in the option port B or Y/
P
B
/P
R
signal from BKM-229X/BKM-256DD
installed in the option port B
HD15 button:
to monitor the signal through the
HD15 input connector
DVI button:
to monitor the signal through the DVI-D
input connector
k
Function buttons
You can turn the assigned function on or off.
The factory setting is as follows;
F1 button:
2D/3D SELECT
F2 button:
SCAN
F3 button:
ASPECT
F4 button:
MULTI DISPLAY
You can assign the function from among SCAN,
ASPECT, EXT SYNC, BLUE ONLY, MONO, MULTI
DISPLAY, APA, I/P MODE, MIRROR IMAGE, 2D/3D
SELECT, L/R SWITCH, DISPARITY SIM., etc., in
FUNCTION BUTTON SETTING of the USER
CONFIG menu (see page 83).
For details of the function assigned to the function
button, see page 83.
l
USER MEM (user memory) button
Press to load the picture settings saved in the USER
MEMORY menu (on page 88).
