Location and Function of Parts and Controls
67
Rear/Bottom Panel
a
/
I
(Equipotential/Function Earth) terminal
(equipotential) terminal
Connects the equipotential plug.
I
(function earth) terminal
Connects the earth cable.
b
COMPOSITE IN connector (BNC)
Input connector for composite signals.
c
Y/C IN connector (4-pin mini-DIN)
Input connector for Y/C signals.
d
G/Y IN connector (BNC)
Input connector for G of RGB signals and component Y
(luminance) signals.
e
B/P
B
IN connector (BNC)
Input connector for B of RGB signals and P
B
(blue color
difference) of component signals.
f
R/P
R
IN connector (BNC)
Input connector for R of RGB signals and P
R
(red color
difference) of component signals.
g
EXT SYNC IN (external sync input) connector
(BNC)
When this unit operates on an external sync signal,
connect the reference signal from a sync generator to
this connector.
To use the external sync signal, press the function button
that EXT SYNC is assigned.
Note
When inputting a video signal with the jitters, etc. the
picture may be disturbed. We recommend using the
TBC (time base corrector).
h
Loop-through output connectors
Outputs the signals input to the input connectors (
2
to
7
). Connect to the analog input (composite, Y/C,
analog component, analog RGB or external sync) of
equipment, according to the input signal.
When a cable is connected to one of these connectors,
the 75-ohm termination of the corresponding input is
automatically released, and the signal input to the input
connector is output.
i
DC 5V/24V IN connector
Connect the DC connector of the supplied AC adaptor.
j
Optional input port
An optional input adaptor can be installed according to
your system configuration (see page 70).
The left side port is A and the right side port is B.
Press the A-1, A-2, B-1 or B-2 button to select the
signal.
2
1
3 4 5 6 7
0
9
qs
qa
qd qf
qg
qh
8
