214
Adjusting the Picture Quality on the Display
3
Press the
V
or
v
button on the right side of the system to adjust the picture
quality, then press the OK button.
4
Press the MENU button to exit the menu.
To reset to the default picture quality
Select “Reset”, the lowest setting item, then press the OK button.
The picture quality menu will disappear when you do not operate it for more than about
10 seconds. The menu will also disappear in the following cases:
– when you press the MENU button
– when you switch the picture on the display using the VIDEO CONF or PC/VIDEO
button on the Remote Commander (The picture quality menu does not disappear
when you switch the videoconference picture.)
– when you adjust the volume
– when you change the wide mode
– when you change the display in PinP or PandP mode
Picture quality menu for videoconference
Notes
Setting item
Press
v
to
Press
V
to
Adjustment range
Mode
select “Vivid”, “Standard” or “Pro”
“Vivid” for bluish tone, or “Pro” for reddish
tone.
–
Picture
decrease picture
contrast
increase picture
contrast
0 to 100
Brightness
darken the picture
brighten the picture
0 to 100
BackLight
darken the backlight
brighten the backlight 0 to 100
PC
Quality
Mode
Standard
Picture
068
Brightness
050
BackLight
100
Reset
PC Adjust:
up: Select:OK Exit:MENU
Summary of Contents for Ipela PCS-TL50
Page 283: ...Sony Corporation ...