126
Sending Motion Pictures as Still Images
To stop “Continuous Send”
Press the ENTER button on the Remote Commander. Select “Stop” from the
displayed submenu with the
V
or
v
button, then press the ENTER button.
To cancel still image display
Press the ENTER button on the Remote Commander to display the submenu.
Select “Clear” with the
V
or
v
button, then press the ENTER button.
You can easily send only one image displayed as a still image during
communication.
1
Press the ENTER button on the Remote Commander during
communication.
The Communication submenu appears.
2
Press the
V
or
v
button on the Remote Commander to select “Send”, then
press the ENTER button.
The motion picture displayed on the local party freezes, and a still picture is
sent to the remote party. When transmission is finished, the message “The still
image has been sent.” appears.
To cancel still image display
Press the ENTER button on the Remote Commander to display the
communication submenu. Select “Clear” with the
V
or
v
button, then press the
ENTER button. When a still image is displayed, the “Send” indication changes
to “Clear”.
To erase the communication submenu
Select “End” from the menu, then press the ENTER button.
When you are receiving a still image
You cannot send a still image to the remote party. Select “Clear”, then send the
still image.
Sending a Still Image Using the Communication Submenu
Send
Save
Icon Display
Presentation
End
OFF
START
Reject Answer
ON
OFF
Summary of Contents for Ipela PCS-TL50
Page 283: ...Sony Corporation ...
