143
Connection Example Using the Data Solution Box
C
h
a
p
te
r 5:
D
a
ta
C
onf
e
ren
ce
The CTE Communication Transducer is an integrated system equipped with
uni-directional microphones and omni-directional acoustic speaker. The
Communication Transducer is enabled to pick up clear voice with minimum
background noise from all directions and to emit clear sound equally in all
directions..
The CTE-600 Communication Transducer is currently not available.
To use the Communication Transducer connected to the Data Solution Box
• Set “CTE” in the Audio Setup menu to “DSB AUX IN” (page 48).
• Set the SYSTEM SELECT switch at the bottom of the Communication
Transducer to “PCS”.
You cannot use two or more Communication Transducers in a room and cannot use it
with other microphones together.
For detailed information on the Communication Transducer, refer to the
Operating Instructions that come with the Communication Transducer.
To connect the CTE-600 Communication Transducer
Note
Note
AUX
MIC 1
MIC 2
MIC 3
MIC 4
MIC 5
TO PROCESSOR
RGB OUT
OUT
LINE OUT
IN
to a wall
outlet
to AUX IN
to an input/output connector
to an input/output
connector
Connecting cable
(supplied with the
CTE-600)
to LINE
OUT
Connecting cable
(not supplied)
PCSA-DSB1S Data Solution Box (Rear)
CTE-600
AC adaptor
(supplied with
the CTE-600)
Interface box
(supplied with the CTE-600)
to DC 6V
to AUX OUT
to LINE
IN
Summary of Contents for Ipela PCS-TL50
Page 283: ...Sony Corporation ...
