199
Starting a Videoconference Using SIP
C
hap
te
r 8
: Vi
de
oco
n
fe
re
n
c
e U
s
in
g SI
P
To dial the remote parties for a multipoint videoconference simultaneously
You can register a “multipoint connection list for SIP” that includes all remote
parties for a multipoint videoconference using SIP in the Phone Book.
Set up the list following “Registering the Remote Parties in the Multipoint
Connection List” on page 166 of Chapter 7.
Register each remote party as follows:
1
Select “Multipoint” under “Line I/F”.
2
Select the line interface icon “
” (or a preferred still image).
3
Select “SIP” from the drop-down list on the right of the text box.
4
Enter the address of the remote party for SIP connection.
When you start a multipoint videoconference, select the “multipoint
connection list for SIP”and press the CONNECT/DISCONNECT (
/
)
button on the Remote Commander. The system then dials all the remote
parties registered in the list.
Operations are the same as those for a point-to-point conference.
For details, see “Receiving a Call from a Remote Party” on page 95.
You can put a call on hold during a point-to-point or multipoint
videoconference when connected by SIP.
Receiving a Call from a Remote Party
Putting a Call on Hold
SIP MULTI
IP
6B (384K)
IP
Summary of Contents for Ipela PCS-TL50
Page 283: ...Sony Corporation ...
