4-28
DSR-300/P(E)/V1
4-20. REPLACEMENT OF T REEL
PLATE ASSEMBLY
Reel table position: Standard cassette position
Replacement Flowchart
Removal
1. Remove the sub reel gear (T) assembly.
(Refer to Section 4-11.)
2. Remove the T reel table assembly.
(Refer to Section 4-5.)
3. Remove the SV-164 board.
(Refer to Section 2-11-8.)
4. Remove the reel plate holder shown in the figure,
and remove the T reel plate assembly.
Attachment
5. Attach the new T reel plate assembly in the
reverse order of step 4.
6. Attach the parts removed in the reverse order of
steps 1 to 3.
Check/Adjustment
7. Perform T reel table height check/adjustment.
(Refer to Section 4-36.)
8. Perform the reel table assembly FWD/REV
rewinding torque check/adjustment.
(Refer to Section 4-38.)
9. Perform tape path check. (Refer to Section 5-3.)
T reel plate assembly
Reel plate holder
Removal of T reel table assembly
Removal of SV-164 board
Replacement of T reel plate assembly
T reel table height check/adjustment
Reel table assembly FWD/REV rewinding torque
check/adjustment
Tape path check
Removal of sub reel gear (T) assembly
