2-77
DSR-300/P(E)/V1
.....
Page 22 Color Temperature Calculation Reference Setting
.....
Page 23 FILTER Display Setting
FILTER 1 to 4
Set the screen indication in accordance with a kind of filter attached.
Setting
1. Turn the MENU dial to move the cursor to FILTER No. on the screen.
2. Push the MENU dial.
3. Turn the MENU dial to display the indication to be set.
By turning the MENU dial, indication will be changed as follows:
3200/3000 K
5
CROSS
5
5600 K
5
5600 K
+
1/4ND
5
5600
K
+
1/8ND
5
5600 K
+
1/16ND
5
5600 K
+
1/32ND
5
5600 K
+
1/64ND
4. To set the indication, push the MENU dial.
COLOR TEMP CAL.
Writes the reference value of color temperature
indication
R
The following write result of R channel’s reference
value:
.
Reference value setting
.
Color temperature indication
B
The following write result of B channel’s reference
value:
.
Reference value setting
.
Color temperature indication
Note:
In COLOR TEMP CAL., it writes the color temperature
calculation reference value during Auto White operation.
Normally, it is not necessary to perform this adjustment.
If the color temperature value, which is indicated on the
screen, differs from an actual value, perform CCD OUT level
adjustment and etc. and to rewrite the reference value as
follows:
1. Shoots the pattern (color temperature = 3200 K).
2. Set the WHT BAL switch to A or B, and perform Auto
White function.
3. Move the cursor on the COLOR TEMP position and push
the MENU dial.
COLOR TEMP CAL.
(YES PUSH)
R
B
128
128
:
:
PAGE 22 (NEXT PREV )
EXIT MENU (YES PUSH)
FILTER1
FILTER2
FILTER3
FILTER4
3200/3000K
5600K
+
1/8ND
5600K
5600K
+
1/64ND
:
:
:
:
PAGE 23 (NEXT PREV )
EXIT MENU (YES PUSH)
