1-5
DSR-300/P(E)/V1
Chapter 1 Overview
8
Chapter 1
Overview
..........................................................................................................................................................................................................
1) DPR = Dual Pixel Readout
2) TTL = Total
Features
Features on Camera Section
1
/
2
-inch IT type Power HAD CCD
The DSR-300/300P Digital Camcorder uses
1
/
2
-inch IT
type Power HAD CCDs. It excels in reduction of
smear, sensitivity and picture quality.
• Smear: –110 dB
• Sensitivity: F11.0 (at 3200 K, 2000 lux)
• S/N: 62 dB (DSR-300) or 60 dB (DSR-300P)
Sophisticated image processing
TruEye™ processing makes possible the following
performance features. This digital signal processing
has brought reproduction of natural colors to the level
achieved by the human eye.
DynaLatitude™
Enables detailed adjustment of contrast control in each
pixel in accordance with a histogram of luminance
signal levels.
DCC+ (dynamic contrast control plus)
Prevents white breakup when shooting a high intensity
subject, and also prevents color faults in high intensity
subject.
Black stretch and compress
Enables control of luminance signal levels in black
areas without changing the hue.
Variety of detail corrections
• Skin detail function: this function gives a slightly
softer appearance to the subject’s face. The target
skin color can be automatically set.
• Black halo correction
• Red/green vertical detail correction: this function
performs vertical detail compensation for both red
and green signals.
• Horizontal detail frequency control
New Functions boost operability
EZ (easy) mode function
When there isn’t time to check the camcorder settings,
simply press the EZ mode button to start the auto
adjustment function using standard settings. There is
no need to lose a shot for lack of setup time.
EZ (easy) focus
Press the EZ focus button before shooting to ensure a
quick and accurate focus.
Dual pixel readout (DPR
1)
)
When the gain is set to either 18 dB or 24 dB, the gain
setting can be doubled (6 dB up) without increasing
the noise level.
Programmable gain
The amount of gain relative to the GAIN switch setting
(H, M, or L) can be programmed as –3 dB, 0 dB, 3
dB, 6 dB, 9 dB, 12 dB, 18 dB, 18 dB+DPR, 24 dB,
24 dB+DPR and hyper gain.
Hyper gain
Hyper gain (36 dB (=30 dB+DPR), or about 60 times
greater than 0 dB) can be easily set via one switch
setting. This can also be done from remote equipment.
Auto tracing white balance (ATW)
This function automatically traces the white balance,
which constantly changes as lighting conditions
change. Auto tracing white balance is especially
useful when there is no time to manually adjust the
white balance or when shooting moves between indoor
and outdoor locations.
Total level control system (TLCS)
Even if the incoming light exceeds the range in which
the standard auto iris can control exposure, the auto
gain control (AGC) or auto exposure (AE) backs up to
ensure proper exposure.
Recording time (REC TIME) display
Recording time can be displayed in either of the
following modes.
• Total recording time for all cuts (TTL
2)
)
• Total recording time for current cut (DUR
3)
)
3) DUR = Duration
Chapter 1 Overview
Chapter 1
Overview
9
Viewfinder super detail
Video signals for the viewfinder are mixed with DTL
signals to make focusing easier.
Dual zebra pattern display
Two types of zebra patterns, zebra 1 and zebra 2 can
be displayed simultaneously or independently. The
zebra 1 can be set to the levels ranging from 70 to 90
IRE on the DSR-300 (or from 70 to 90% on the DSR-
300P) and the zebra 2 indicates the levels of 100 IRE
or more for the DSR-300 (or the levels of 100% or
more for the DSR-300P).
Color temperature display
When reading the white balance, the color temperature
is displayed on the viewfinder screen.
Switching the color temperatures for the
preset white balance
You can select the preset white balance at 3200 K or
5600 K by setting the FILTER control. The 3200 K
preset can be switched to the 3000 K preset when the
menu setting is changed.
Video monitor output with text
The video signal with text superimposed that is shown
in the viewfinder can also be output to an external
video monitor.
1-kHz reference signal output
Along with a color bar, a 1-kHz reference signal can
also be output.
Freeze mix function
The freeze mix function superimposes any previously
recorded still picture on the viewfinder screen to
facilitate framing the subject when reshooting the
scene.
Edit Search Function
Pressing the EDIT SEARCH buttons allows the tape to
play back in search mode. Set either of two playback
speeds.
SetupLog
TM
function
Settings at shooting are recorded onto the tape in real
time. This recorded data can then be used to reproduce
the same shooting conditions in subsequent shots. It
also makes it easier to identify the cause of problems
in previous shots.
Video light control
A video light connector and control switch are
equipped. You can turn the light on and off
automatically as you start and stop VCR operation.
High-performance viewfinder (DXF-
701WS/701WSCE)
• High resolution (600 TV lines of horizontal
resolution)
• Large-diameter eye cup for easier viewing and
focusing
• PEAKING potentiometer for vertical and horizontal
detail control
• Two indicators can be used as TALLY indicators
• Tough die-cast aluminum body
Features on VCR Section
The DSR-300/300P uses the DVCAM recording
format. The internal signal processing is digitalized to
provide more stable output signals and higher
reliability.
Compatible with consumer DV
A DV cassette recorded on a DV-format VCR can be
played back on the DSR-300/300P. (Cassettes
recorded in LP mode cannot be played back.)
DVCAM cassettes
• The DSR-300/300P can use both standard-size and
mini-size DVCAM cassettes. According to cassette
size, the DSR-300/300P automatically corrects reel
position.
• The maximum recording/playback times are 184
minutes for standard size cassettes and 40 minutes for
mini cassettes.
• DVCAM cassettes include a cassette memory.
Information about the editing points (ClipLink™ log
data) that is specified while shooting is recorded into
this cassette memory.
