SonoSite C1.9 PLUS, Service Manual

Page: 35 / 98

Chapter 4: Setup and Operation 27
Figure 4.4 License Update Screen
Note: The software versions on your system may vary based on your upgrade
and configuration.
2. Enter your license key in the license number field.
If the license key that you entered is recognized by the system as being valid for
your system and the software you installed,
done appears on-screen. Select
done from the on-screen menu to install the license key and license your
software.
If the license key that you entered is not recognized by the system, the register
later button remains on the screen as long as the defined grace period has not
expired.
If the grace period has expired, the menu item will indicate this by showing zero
hours remaining in the grace period. At this point, you must then enter a valid
license key before you can use the system with this or any other transducer.
Note: If you have entered a valid license key and you cannot complete the
licensing procedure, verify that the license key has been entered correctly. The
license key should be exactly 12 digits (for example, 123348990552) with no
other characters or punctuation.
Note: If after confirming correct entry of the license key, you are still unable to
license your system, call SonoSite technical support. USA/Canada customers call
1-877-657-8118 . International customers call your local representative or
1-425-951-1330 .
If the system is on and the grace period expires, the license update screen must
be displayed from the system information screen.