Page 26
Configuring Interfaces
Manual PortShield Configuration
You can also manually group ports together using the graphical
PortShield Groups interface. Grouping ports allows them to
share a common network subnet as well as common zone
settings.
To manually configure a PortShield interface:
1.
Navigate to the
Network > PortShield Groups
page.
2.
Click one or more interfaces in the PortShield interface and
then click the
Configure
button.
3.
Select Enabled from the
Port Enable
drop-down menu.
4.
Select the port with which you wish to group this interface
from the
PortShield Interfaces
drop-down menu
Note:
Interfaces must be configured before being grouped
with PortShield. For instructions, see the Configuring
an Interface section, on page 24.
5.
Click the
OK
button. Your new port groupings display as
color-coded ports.
TZ_210_GSG.book Page 26 Thursday, November 13, 2008 7:41 PM
