SonicWALL TZ 210 Series Getting Started Guide
Page 19
Verifying Security Services on Zones
Security services such as Gateway Anti-Virus are automatically
applied to the LAN and WAN network zones. To protect other
zones such as the DMZ or Wireless LAN (WLAN), you must
apply the security services to the network zones. For example,
you can configure SonicWALL Intrusion Prevention Service for
incoming and outgoing traffic on the WLAN zone to add more
security for internal network traffic.
To apply services to network zones:
1.
Navigate to the
Network
>
Zones
page.
2.
In the Zone Settings table, click the
Configure
icon for the
zone where you want to apply security services.
3.
In the
Edit Zone
dialog box on the
General
tab, select the
checkboxes for the security services to enable on this
zone.
4.
Click
OK
.
Congratulations!
Your SonicWALL TZ 210 series appliance is
registered and fully functional with active UTM security services
enabled.
For advanced network setup information, continue to:
•
Advanced Network Configuration
•
TZ_210_GSG.book Page 19 Thursday, November 13, 2008 7:41 PM
