SonicWALL TZ 210 Series Getting Started Guide
Page 25
PortShield Wizard
With PortShield, multiple ports can share the network settings of
a single interface. The SonicWALL PortShield feature enables
you to easily configure the ports on the SonicWALL TZ 210
series appliance into common deployments.
Tip:
Zones can always be applied to multiple interfaces in
the
Network > Interfaces
page, even without the use
of PortShield groupings. However, these interfaces will
not share the same network subnet unless they are
grouped using PortShield.
To configure ports using the SonicWALL PortShield Wizard:
1.
Click the
Wizards
button on the top-right of the SonicOS
management interface.
2.
Choose
PortShield Interface Wizard
and click Next.
3.
Select from the following:
4.
WAN/LAN or WAN/LAN/DMZ and click
Next
to
continue.This will prompt a configuration summary to
appear. Verify that the ports assigned are correct.
5.
Click
Apply
to change port assignments.
Note:
For more information about PortShield interfaces, see
the SonicOS Enhanced Administrator’s Guide.
Selection
Port Assignment
Usage
WAN/LAN
X0, X2-X6: LAN
X1: WAN
Connect any local network device to X0, or
X2-X6 for local and Internet connectivity.
WAN/LAN/
DMZ
X0, X3-X6: LAN
X1: WAN
X2: DMZ
Connect any local network device to X0, or
X3-X6 for local and Internet connectivity.
Connect public-facing servers or other
semi-public resources to X2.
TZ_210_GSG.book Page 25 Thursday, November 13, 2008 7:41 PM
