19
EN
advaNcEd ParamETEr sETTiNg
2 buttons
4 buttons
or
or
Complete
Opening
Pedestrian Opening
(if activated)
Free
1
1
2
2
3
4
1
2
CODE
3
4
1
2
CODE
3
4
1
2
CODE
3
4
1
2
CODE
Possible combinations for fully open /
Pedestrian opening buttons on a remote control:
[1].
Place the remote control to be
memorised on the target.
[2].
Briefly press the button on the remote
control that will control the COMPLETE
opening of your gate.
> The RADIO indicator
will come
on then go out when you release the
button on the remote control.
The button has been memorised.
[1].
Place the remote control to be
memorised on the target.
[2].
Briefly press the up or down
button on the remote control.
> The
RADIO
indicator
lights
up
then
goes
out.
The remote control has been
stored.
<0,5s
If you have stored 16 remote controls and you store a 17th remote control, the
first remote control stored will be deleted and so on.
<0,5s
Note:
The motor parameter setting cannot be carried out when the gate is moving.
Changes to the parameters will be taken into account after the first time the gate is opened.
selection of the buttons of your 2 or 4 button remote
controls
You can memorise any button on your
remote control to control the opening of
the gate.
The following button, if activated, will
make it possible to control pedestrian
opening of the gate (see page 20 to
activate pedestrian opening).
Button 1 cannot be programmed
for pedestrian opening.
Any free buttons or the pedestrian button
when not activated can be used to control
other automatic functions (garage door,
roller blind, etc.).
memorising a 2 or 4 button remote control
memorising a 3 button remote control
