20
EN
activating the auTo closiNg mode (recommended
for solar power)
activating pedestrian opening
[2].
Briefly press the button to be
activated on the remote control.
>
The
RADIO
and
PEDESTRIAN
indicators will
light up then go out. Pedestrian
opening is activated on this
button.
[1].
Place the memorised remote
control on the target.
<0,5s
To deactivate pedestrian opening on a button
, repeat the procedure for activation pedestrian
opening (described above) for this button. The PEDESTRIAN indicator
goes out.
Note
The automatic mode can only be activated if a set of photoelectric cells is installed
(see wiring page 23).
The remote control must be placed on the electronic unit to access the settings.
Access to the settings with a 3 button remote control is not possible.
To deactivate automatic closing mode and return to sequential mode,
repeat step 1 above and
briefly press button 2
on the remote control, the AUTO CLOSE indicator will go out and
then flash. Press button 1
on the remote control twice.
2
3
1
x2
[1].
Place
a
memorised
2 or 4 button remote
control on the target.
Press button 1
on the
remote control until the
AUTO CLOSING indicator
flashes.
[2].
Press button 2
on the
remote control until the AUTO
CLOSE indicator goes out
then lights up continuously.
Release the button.
> The AUTO CLOSE
indicator
flashes.
[3].
Press button 1
on the
remote control twice.
> The AUTO CLOSE
indicator stays on to
indicate that automatic
mode has been activated.
Pedestrian opening can be activated on the button of a memorised 2 or 4 button remote
control (see "Selecting the buttons of your remote control" page 19).
Note:
Once step 1
has been carried out,
you can carry out
the following steps
remotely
(without
placing the remote
control on the target).
