3
EN
Watch your gate while it is moving.
Any switch without a locking device*** must be in direct view of the driven part, but away from any
mobile parts. It must be installed at a minimum height of 1.5 m and must not be accessible to the
public, unless it is key-operated. Ensure that people remain at a distance when it is in use.
Maintain a clear area of 500 mm from the end of the gate when it is completely open.
After installation, ensure that the mechanism is correctly adjusted and that the protection
system and any manual release mechanism operate correctly.
Somfy declares that this product complies with the essential requirements and other relevant
provisions of Directive 1999/5/EC. A Declaration of Conformity is available at www.somfy.
com/ce. Product can be used in the European Union and Switzerland.
*** example: interphone, key lock, code keypad...
ProducT dEscriPTioN
This motor is designed for sliding doors on individual residential properties.
composition of the kit
No.
description
Quantity
1
Cover
1
2
Aerial
1
3
Electronic unit
1
4
Motor
1
5
Cover screw
1
6
O-ring (9 x 2)
1
7
Rack (33 cm)
12
8
Galvanised screw (M10)
8
9
Galvanised medium plain washer (10.5 x 22 x
2)
8
10
Cable grommet
1
11
Dual thread lag screws (M10 x 15)
4
12
Plug (12 x 60 S12)
4
13
Galvanised TCB self-tapping screw (M4 x 12)
3
14
Serrated washer (AZ4)
1
15
Cable clip
1
16
Medium plain washer (M4 x 10)
1
17
Insulated round terminal (D4)
1
18
Installation template to be cut out (printed on
card)
1
19
Electronic unit label
1
20
Pencil
1
21
Keytis NS 2 RTS remote control
1/2
only in the freevia 300 kit
22
Set of photoelectric cells
1
Do not throw away your scrapped equipment or used batteries with household waste.
It is your responsibility to dispose of your electronic equipment in the relevant recycling
points.
