32
EN
3
2
1
[1].
Place a memorised 2 or 4 button remote control on the target.
Press button 1 on the remote control until the AUTO CLOSING indicator
flashes.
[2].
Press button 1 on the remote control once.
> The MEMORY RESET indicator flashes.
[3].
Press button 2 on the remote control until the MEMORY RESET indicator comes on.
Release button 2.
> The STATUS indicator
flashes.
clear the settings
►
The cleared settings are: the gate travel and automatic closing of the gate.
When to clear the settings?
After programming the gate's travel, if you are modifying the motors' wiring.
In case of spurious obstacle detection because of normal wear on the gate.
