![background image](http://html.mh-extra.com/html/somfy/animeo-solo-1860143/animeo-solo-1860143_owners-manual_1317467019.webp)
19
1 sek
25 sek
25 sek
Set running time
Set tilt time
/
Motor
Use function...
Set tilt time...
Set up running time...
Set down running time...
The Motor settings menu
Motor - Running and Tilt times
Here you set the desired down position of the solar protection (Running time) and
slat angle if you are controlling a blind (Tilting time) for each zone. The easiest way
to find out the required running and tilting times is to measure the time from the
solar protections fully up/in position to the desired down/out position, and then enter the time
values into the system. The positions you set is the position the solar protection will take when
for example the Sun function is active.
Test your running and tilt times by using the Manual commands. For blinds remember to press
a second time on the down button during the movement to activate the tilting. (see page 5).
H
The motors have a built in limit settings that should be set by the installer of the solar
protection. The limit settings avoids that the solar protection may get damaged if you set
too long running times.
Set Down running time
Make sure that solar protection for the zone in question is fully up by commanding the zone up
via the manual command button. Check by watching the zone that the solar protection really is
fully up. Check that the zone in question is in manual mode (see page 9).
Then press the down button and start measure the time as soon as the solar protection starts
to move. Stop the time when the solar protection has reached the desired down position. Enter
the measured time into the system’s Down time