![background image](http://html.mh-extra.com/html/somfy/animeo-solo-1860143/animeo-solo-1860143_owners-manual_1317467024.webp)
24
If you want to test a function, e.g. the sun, you have to wait for the on and off
delays.By setting the controller to test mode all delays will be shortened by a factor
of 60.
Important! Do not forget to return to normal mode when finished.
Tip when testing
FAQ
• Why do the solar protection go down when I press the Up button (or vice versa)
- There is an mistake in the wiring (see Installation manual for more info REF. 5053517).
• The solar protection does not go sufficiently low when the sun shines.
- Increase the down running time (see page 19).
• The blinds do not tilt enough when the sun shines.
- Increase the tilt time (see page 20).
• I can’t move the solar protection manually
- Check LCD screen to see if any blocking function is active (e.g. wind) (see page 5 and 9).
• There is sun but the solar protection is not down.
- Is the control in automatic mode? (see page 5).
- Is the sun function enabled? (see page 5 and 17).
- Check LCD screen to see if any blocking function is active (e.g. Wind, Timer, Error or Get Heat) (see page
5 and 9).
- Is there sun on the sun sensor?
-Perhaps your sun on threshold is set to high? Check present sun value in sensor status and compare
with your “On threshold” (see page 17).
- Is the sensor allocated correctly? (See page 17). Is there any errors? (See page 21).
• There is no sun but the solar protection is down.
- Is the control in automatic mode? (See page 5 and 9)
- Is the sun function enabled? (See page 17)
- Check LCD screen to see if any blocking function is active (e.g. Preserve Heat ,Timer) (see page 9 and 10).
- Is there sun on the sun sensor?
- Perhaps your sun up threshold is set to low? Check present sun value in sensor status and compare
with your on threshold (see page 17).
- Is the sensor allocated correctly? (See page 17).
• The solar protection moves to often up and down during a partially cloudy day
- Increase “sun off” and “sun on” delay (see page 17).
• It’s very windy but the solar protection is still out.
- Is wind function enabled? (See page 11)
- Is wind sensor rotating?
- Is the wind sensor mounted in adequate position?
- Perhaps your wind threshold is set to high? Check present wind value in sensor status and compare
with your threshold (see page 11).
- Is the sensor allocated correctly? (See section page 11).
• Nothing seams to work as it used to do
- Check if there is an error indicated on the LCD screen or in the error list (see page 11).
- Read the Installation manual (REF. 5053517) for other important information.
- Contact your supplier or www.somfy.com