9
Priority
Function
Action
1
Lock (via control unit)
Up and block
2
Lock (via external switch)
Up and block
3
Alarm
Up and block
4
Error
Up and block
5
Wind
Up and block
6
Precipitation – rain and snow
Up and block
7
Manual command (via control unit)
Up, stop or down
8
Manual command (via external switch)
Up, stop or down
9
Timer
Up or down + tilt
10
Get heat
Up
11
Preserve heat
Down
12
Sun
Down + tilt
Au
to
m
ati
c m
od
e
M
an
ua
l m
od
e
System functions
Introduction
In this chapter we go through all functions in detail. But first some information that is good to
know to better understand the system in general.
H
In the system menu you can not access the functions Lock (both via unit and via
external switch) or the Manual commands (both via unit and via external switch). These
functions are always enabled.
Function Priorities
To understand the functionality of animeo Solo it’s important to understand function priorities.
Priorities are simply a way to determine which function and action that should be executed at a
certain moment.
In the table 1 below you find all functions, its priority and linked action.
Manual and Automatic mode
In Automatic mode all functions can get active. In Manual mode functions 9-12 in the table can
not get active, meaning that no down commands will be given automatically.
Manual commands (see page 13-14) can be performed in both Manual and Automatic mode.