![background image](http://html.mh-extra.com/html/somfy/animeo-solo-1860143/animeo-solo-1860143_owners-manual_1317467013.webp)
13
/
Precipitation
Use function.
Delay...
Use function...
The Precipitation function menu
Adapt the function:
If you feel that the system reacts too slow during precipitation then
decrease the On delay. If you feel that the solar protection goes up and down too often during a
rainy day
then increase the Off delay.
H
This function requires a precipitation sensor connected. Precipitation is active in both
Manual and Automatic mode. For interior solar protection this function is normally not
used since interior solar protection is installed inside and thus will never be affected by
precipitation.
Precipitation parameters
Function
Range (Step)
Per Zone
Default
Advanced
Used
Yes/No
Yes
Yes
No
On Delay
0-10min
Yes
2min
Yes
Off Delay
5-60min
Yes
20min
Yes
Manual command - via control unit
About:
The position of the solar protection, commanded automatically by the system,
is sometimes for you not the perfect position for a given moment. If this is the case then
you can manually command the solar protection to a desired position.
Active:
By pressing on the up, stop, down push buttons (see page 5) you activate this function
and can command the solar protection, per zone, to any wanted position. When you command
the solar protection down and if you press a second time on the down button whilst the solar
protection is running, a tilt action will be performed (see page 20 for more info).
In Manual mode only Security functions with higher priority can override your preferred
position. But in Auto mode your preferred position will be overridden as soon as function status
in the system is changed.