![background image](http://html.mh-extra.com/html/somfy/animeo-solo-1860143/animeo-solo-1860143_owners-manual_1317467022.webp)
22
Error list
In the Error list you can see the errors that the system has. The error messages can be good to
start from in order to solve the problem. The following errors (see table on the next page) are
automatically detected by animeo Solo.
Nr
Error
Action
1
Sun sensor – not connected
Sun sensor x not connected. Please check cabling.
2
Sun sensor – short circuit
Sun sensor x short circuited. Please check cabling.
3
Temp sensor – short circuit
Temp sensor short circuited. Please check cabling.
4
Wind sensor 24h timeout
No signal from wind sensor in 24h. Please check
sensor and cabling.
You can reset the error list by focusing and select the first entry choice in the list.
Alarm
Here you can enable the Alarm function.
See page 10 for more info about the function.
Clock settings
Go to this menu if you want to change the time, for example when changing from winter to summer
time.
If the controller has been turned off for more then 12-24h, you must set the time again.
Language
In this menu you can set the language that will be shown on the LCD Screen. Following
languages are available: English, French, German, Italian, Dutch, Swedish, Danish, Norwegian,
Finnish, Spanish, Polish, Hungarian, Portuguese, Romanien and Czech.
Contact info
In this menu contact and support information is available. Use this info when there is a need
for support.
Network mode
In this menu you can see what kind of Network mode the system uses. (see Installation manual
for more info REF. 5053517)
Software version
In this menu you can see the system’s software version.
Factory Reset
In this menu you can reset the system to factory settings.
All your settings will be over written!