![background image](http://html.mh-extra.com/html/somfy/animeo-solo-1860143/animeo-solo-1860143_owners-manual_1317467011.webp)
11
/
Wind
Use function...
Threshold...
Delay...
Sensor allocation...
Use function...
The first parameters in the Wind function menu
Alarm parameters
Function
Range (Step)
Per Zone
Default
Advanced
Used
Yes/No
No
No
Yes
Error
About:
If an error should occur, the solar protection in that zone will be blocked in
up position. Error security function can only get active if the wind function is enabled
and the allocated/linked wind sensor(s) has not sent pulses of movement in 24 hours
to the system.
Active:
The Error function gets active when there is something wrong with the wind sensor.
Check that the wind sensor cable is connected properly to the system and to the sensor itself.
Check the cable between the system and the sensor so that it is not damaged or broken. Check
that the sensor is not damage and that it can rotate. If the errors still remains please contact
your nearest Somfy dealer.
H
This function is active in both manual and automatic mode. This function is always
enabled and can not be disabled.
Wind
About:
The Wind function is used to ensure that the solar protection will not get
damaged by wind. Enable this function for each zone where you have external solar
protection by selecting Yes in the “Use function” parameter.
Active:
The function gets active and the solar protection will be locked in up position when
the wind speed exceeds the wind Threshold for a certain time (On delay). The function will get
inactive when the wind speed is lower than the wind threshold for a certain time (Off delay).
H
If it’s both very windy and sunny at the same time, the solar protection will of course be
blocked in up position in order to secure that no damage of the solar protection will occur. This
means that the wind function has higher priority than the sun function. Security functions (Nr.
1-6 in table 1) can never be overridden by a lower prioritized function.
Adapt the function:
If you feel that the solar protection should go up for weaker winds then
decrease the Threshold. If you feel that the system reacts too slowly when there is wind then
decrease the On delay. If you feel that the solar protection goes up and down too often a windy
day
then increase the Off delay.