animeo KNX/EIB 4 AC MoCo • REF. 5050779 -
28/31
On this parameter card the parameters can be selected in order to announce the status positions of the individual blinds on the bus. The
status positions generated thus are based on the configured running and tilting times of the parameter cards “Motor 1…4“ or“
Motor 1-4“.
Feedback of status
Upper/lower end positions
Options:
No
Yes
Type of feedback
Options:
Combined when all are UP / DOWN
Individual
Combined when all are UP / DOWN
If this parameter is selected, the appropriate end position, UP or DOWN, is sent only to the bus when all four blinds have reached the upper
end limit (object 50), and respectively when all four end products have reached the lower end position (object 55).
Individual
If this parameter is selected, the appropriate end position, UP or DOWN, is sent to the bus individually for each blind. Two objects are
available per motor output (objects 46-49 and 51-54).
MOTOR 1...4
Feedback for
Options:
UP / DOWN position
Slat position
UP / DOWN and slat position
None
UP / DOWN position
Over this parameter the position UP / DOWN is sent to the bus for the appropriate motor, depending on the parameter “Motor 1-4 type of
feedback “. “0 “= UP/ “255 “= DOWN.
Slat position
Over this parameter the position of the slat is sent to the bus for the appropriate motor, depending on the parameter “Motor 1-4 type of
feedback “. “0/255 “= slat opened, “255/0 “= slat closed.
The value for the slat position which is sent depends on the parameter selection on the parameter card “General, slat position closed/reversed
ONLY FOR VENETIAN BLINDS“.
Parameter card “Feedback motor position“
This parameter opens the parameter “Type of feedback
upper/lower end positions“.
value 0/255
value 255/0
