animeo KNX/EIB 4 AC MoCo • REF. 5050779 -
15/31
Parameter card „motor 1...4 / motor 1-4“
Four individual parameter cards (Motor 1…4) become visible if on the parameter card “General” the motor output configuration is set to
“Individual“. Only one parameter card (Motor 1-4) becomes visible, if on the parameter card “General“ the basic adjustment of the motors is
set to “Common“.
Universal binary inputs use
Options:
No
Yes
With the parameter “Yes” four further parameter cards (binary input 1…4) are opened. The local switch inputs can be linked now over the
appropriate objects (69-100). A conventional switch can be used thus for most diverse functions. For example switching, venetian blind
function, dimming or sending values.
Group control input
Options:
disabled
enabled
Over this parameter it can be specified whether the group control input is disabled or enabled. Over this input all four motors are moved at
the same time. Independently of the parameter configurations the security configurations (objects 26-35) have higher priority. If one of the
security objects is active the group control input is disabled.
n
With bus voltage failure this input is enabled even if it is disabled over the parameter configurations and can be used for an emergency
operation. With bus power return this input is disabled or enabled according to the parameter configurations.
Slat position closed/reversed
ONLY FOR VENETIAN BLINDS
Options:
Max. closed (255) / Max. reversed (0)
Max. closed (0) / Max. reversed (255)
Max. closed (255) / Max. reversed (0)
If a value of „255“ is received by the appropriate object (12-15) the slat will be maximal closed.
If a value of „0“ is received by the appropriate object (12-15) the slat will be maximal reversed (opened).
Max. closed (0) / Max. reversed (255)
If a value of „0“ is received by the appropriate object (12-15) the slat will be maximal closed.
If a value of „255“ is received by the appropriate object (12-15) the slat will be maximal reversed (opened).
value
(0/255)
value
(255/0)
