SOMFY Animeo KNX/EIB DRM Series, Installation Manual

Page: 2 / 31

animeo KNX/EIB 4 AC MoCo • REF. 5050779 -
2/31
m
Before installation, please read the safety instructions carefully. Failure to respect these instructions automatically
invalidates warranty and all liability claims against SOMFY (e.g. wrong installation, maloperation etc.). The product
must be installed by a qualified electrician! All connections has to be disconnected from mains before mounting! Make
precautions against switching on by accident!
The installation of Somfy products has to be made at easily accessible places only. For maintenance and repairs which
are difficult to perform because of bad accessibility (e.g. clotted or extensive clotted floors, installation behind lamps or
behind façades) additional costs cannot be claimed against the seller.
Table of contents
Introduction ..................................................................................................... 3
Definitions ....................................................................................................... 4
Assembly ......................................................................................................... 5
Wiring Diagram .................................................................................................. 5
2.1 Checking the running direction of the blinds ................................................................. 6
Settings on delivery status ....................................................................................... 7
3.1 Function of the Reset/Prog button ........................................................................... 7
3.2 Selection of different user ergonomics ....................................................................... 7
3.3 Manual setting of running and tilting times .................................................................. 8
3.4 Manual setting of intermediate position 1 .................................................................... 8
3.5 Reset to delivery status ..................................................................................... 8
Communication objects .......................................................................................... 9
Parameters ..................................................................................................... 13
Diagnosis ....................................................................................................... 29
6.1 LEDs at the animeo KNX/EIB Motor Controller ................................................................ 29
6.2 Information during operation .............................................................................. 29
6.3 Status of configurations .................................................................................... 30
Technichal Data ................................................................................................. 30
0
2
3
4
5
6
7
1