animeo KNX/EIB 4 AC MoCo • REF. 5050779 -
10/31
No.
Object name
Type
Description
16
Motor 1 Move to IP 1
1 Bit (EIS 1)
If a telegram with the value “1” is received on this communication
object, the appropriate blind goes to the intermediate position 1 which
was configured by local switch or by remote control or parameterised in
the ETS parameters. The last position which has been configured is active.
Receiving a telegram with the value “0“ on one of these communication
objects the appropriate blind goes to the upper end position.
17
Motor 2 Move to IP 1
1 Bit (EIS 1)
18
Motor 3 Move to IP 1
1 Bit (EIS 1)
19
Motor 4 Move to IP 1
1 Bit (EIS 1)
20
Motor 1-4 Move to IP 1
1 Bit (EIS 1)
If a telegram with the value “1” is received on this communication
object, the blinds 1-4 go to the intermediate position 1 which was
configured by local switch or by remote control and parameterised in the
ETS parameters. The position which has been configured at last is active.
Receiving a telegram with the value “0“ on one of these communication
objects the blinds 1-4 go to the upper end position.
21
Motor 1 Move to IP 2
1 Bit (EIS 1)
If a telegram with the value “1” is received on this communication
object, the appropriate blind goes to the intermediate position 2 which
was parameterised in the ETS parameters. Receiving a telegram with the
value “0“ on one of these communication objects the blind goes to the
upper end position.
22
Motor 2 Move to IP 2
1 Bit (EIS 1)
23
Motor 3 Move to IP 2
1 Bit (EIS 1)
24
Motor 4 Move to IP 2
1 Bit (EIS 1)
25
Motor 1-4 Move to IP 2
1 Bit (EIS 1)
If a telegram with the value “1” is received on this communication
object, the blinds 1-4 go to the intermediate position 2 which was
parameterised in the ETS parameters. Receiving a telegram with the value
“0“ on one these communication objects the blinds 1-4 go to the upper
end position.
26
Motor 1 Security, low prio
1 Bit (EIS 1)
If a telegram with the value “1” is received on this communication
object, the appropriate blind goes to the position which was para-
meterised in the ETS parameters. When one of the communication objects
receives a telegram with value “0” no action will be executed. Only with
the selection “Repeat the last telegram after security (Yes)“ in the ETS
parameters this action will be executed on the appropriate blind. If one
of these communication objects is active through a telegram with the
value “1“ and if then on one of the communication objects 31-34
(security position, high priority) a telegram with value “1“ is received, the
appropriate blind will move to the position configured in the ETS para-
meters (security position, high priority).
27
Motor 2 Security, low prio
1 Bit (EIS 1)
28
Motor 3 Security, low prio
1 Bit (EIS 1)
29
Motor 4 Security, low prio
1 Bit (EIS 1)
30
Motor 1-4 Security, low prio
1 Bit (EIS 1)
If a telegram with the value “1” is received on this communication
object, the blinds 1-4 go to the position which was parameterised in the
ETS parameters. When the communication object receives a telegram with
value “0” no action will be executed. Only with the selection “Repeat the
last telegram after security (Yes)” in the ETS parameters this action will be
executed on the blinds 1-4.
If this communication object is active through a telegram with the value
“1“ and if then, on the communication object 35 (security position, high
priority) a telegram with the value “1“ is received the blinds 1-4 will
move to the position configured in the ETS parameters (security position,
high priority).
31
Motor 1 Security, high prio
1 Bit (EIS 1)
If a telegram with the value “1” is received on this communication
object, the appropriate blind goes to the position which was para-
meterised in the ETS parameters. When one of the communication objects
receives a telegram with value “0” no action will be executed. Only with
the selection “Repeat the last telegram after security (Yes)” in the ETS
parameters this will be executed in the appropriate blind. If an object for
security position, low priority is active (“1“), the appropriate para-
meterised position will be started up.
32
Motor 2 Security, high prio
1 Bit (EIS 1)
33
Motor 3 Security, high prio
1 Bit (EIS 1)
34
Motor 4 Security, high prio
1 Bit (EIS 1)
35
Motor 1-4 Security, high prio
1 Bit (EIS 1)
If a telegram with the value “1” is received on this communication
object, the blinds 1-4 go to the position which was parameterised in the
ETS parameters. When the communication object receives a telegram with
value “0” no action will be executed. Only with the selection “Repeat the
last telegram after security (Yes)” in the ETS parameters this action will be
executed in the blinds 1-4. If an object for security position, low priority
is active (“1”) the appropriate parameterised position will be started up.
