animeo KNX/EIB 4 AC MoCo • REF. 5050779 -
12/31
No.
Object name
Type
Description
61
Motor 1 Prio automatic/manual
1 Bit (EIS 1)
Over these communication objects priority between automatic functions
and manual functions can be switched. If on one of these
communication objects a telegram with the value “1“ is received priority
automatic functions is active for the appropriate blind. If on one of these
communication objects a telegram with the value “0“ is received priority
manual functions are active for the appropriate blind.
62
Motor 2 Prio automatic/manual
1 Bit (EIS 1)
63
Motor 3 Prio automatic/manual
1 Bit (EIS 1)
64
Motor 4 Prio automatic/manual
1 Bit (EIS 1)
65
Motor 1 Reset priority
1 Bit (EIS 1)
If on one of these communication objects a telegram with the value “1“
or “0“ is received the appropriate priority for the appropriate blind is
reset. Priority automatic functions or priority manual functions are then
again actively switched. The active priority depends on which communi-
cation object is active and/or which priority has been selected in the ETS
parameters.
66
Motor 2 Reset priority
1 Bit (EIS 1)
67
Motor 3 Reset priority
1 Bit (EIS 1)
68
Motor 4 Reset priority
1 Bit (EIS 1)
69
Input 1: UP / DOWN
1 Bit (EIS 1)
A long pressing of the switch at the input A generates a telegram with
the value “0” on this communication object. The venetian blind goes UP.
A long pressing of the switch at the input B generates a telegram with
the value “1” on this communication object. The venetian blind goes
DOWN.
70
Input 1: Step/Stop
1 Bit (EIS 1)
A short pressing of the switch at the input A generates a telegram with
the value “0” on this communication object. The slat will tilt to reverse
(open). If the venetian blind is in the fully moving process with a short
pressing of the switch at the input A, a stop order is generated.
A short pressing of the switch at the input B generates a telegram with
the value “1” on this communication object. The slat will tilt to close. If
the venetian blind is in a fully moving process with a short pressing of
the switch at the input B a stop order is generated.
71
Input 1: A, Switch
1 Bit (EIS 1)
According to the parameter settings and the state at input 1, contact A,
over this communication object a switching telegram with the value “1“
or “0“ is generated.
72
Input 1: B, Switch
1 Bit (EIS 1)
According to the parameter settings and the state at input 1, contact B,
over this communication object a switching telegram with the value “1“
or “0“ is generated.
73
Input 1: A, 8-Bit value
1 Byte (EIS 6)
According to the parameter settings with a rising edge at the input 1,
contact A, the configured value (0-255) is sent.
74
Input 1: B, 8-Bit value
1 Byte (EIS 6)
According to the parameter configurations with a rising edge at the input
1, contact B, the configured value (0-255) is sent.
75
Input 1: A/B, Dimming
1 Bit (EIS 2)
On/Off:
According to the parameter settings of the input 1 contact A/B with a
short actuation a telegram with the value “1“ and/or “0“ will be
generated.
Toggle/Toggle:
According to the parameter settings of the input 1 contact A/B with a
short actuation a telegram with the value “1“ and/or “0“ is generated.
76
Input 1: A/B, Dimming value
4 Bit (EIS 2)
Brighter/darker dimming:
According to the parameter settings of the input 1 contact A with a long
actuation it is dimmed brighter. According to the parameter settings of
the input 1 contact B with a long actuation it is dimmed darker.
Brighter/darker toggle:
According to the parameter settings of the input 1 contact A with a long
actuation it is dimmed 100 %. When releasing the appropriate switch at
the input A a stop order is generated. The dimming action operated last
is thus inverted.
According to the parameter settings of the input 1 contact B with a long
actuation it is dimmed 100 %. When releasing the appropriate switch at
the input B a stop order is generated. The dimming action operated last
is thus inverted.
