animeo KNX/EIB 4 AC MoCo • REF. 5050779 -
27/31
On this parameter card the reaction can be defined for bus power failure and bus power return of each individual motor output.
MOTOR 1...4
Reaction at bus power failure
Options:
Upper end position
Lower end position
Ignore
Intermediate position 1
Intermediate position 2
Close window
Open window
Ignore
MOTOR 1...4
Reaction at bus power return
Options:
Upper end position
Lower end position
Ignore
Intermediate position 1
Intermediate position 2
Close window
Open window
Ignore
MOTOR 1...4
Reaction at main power return (230 V)
Options:
Upper end position
Lower end position
Ignore
Close window
Open window
Automatic cascading
Options:
No
Yes
If the parameter “Yes“ is selected, each motor output with 1 second of delay will move to the appropriate position. This deceleration time
arises considered in the case of “Reaction at Bus power return” and “Reaction at main power return (230V)”. The position selected in the
parameters for the according motor output will be driven to.
n
Advantage: The current peaks can be lowered thus in larger projects.
Parameter card „Bus safety“
This parameter defines the position which will be
generated at bus power failure.
This parameter defines the position which is generated at
bus power return.
This parameter defines the position which is generated at
main power return (230 V).
