SolarGaps SGV1C80-10-R Series Operation Manual Download | Manualshive

Page: 22 / 45

background image

EN.22

8. Start-up and adjustment works
8.1.

Control the BLINDS using a smartphone running iOS 11 or higher. Android

smartphones shall use 4.4 Kitkat (API level 19) or higher.

8.2.

High quality Wi-Fi signal is needed to ensure reliable control of the BLINDS. At that,

the communication speed shall be above 1 Mbit/s and RSSI value shall be in the range 0-
74 dBm.

8.3.

Control the BLINDS using special SolarGaps smartphone application.

8.4.

To download the application, go to Apple Store or Google Play respectively.

8.5.

After installing the application, follow the menu instructions to perform all the

necessary operations consequently.

8.6.

Check in the application setup menu, whether the BLINDS require firmware update.

If it is necessary, upgrade the BLINDS firmware version using the application.

8.7.

If you fail to perform any operation required by the application menu, send a request

to

[email protected]

.

NOTE

:

The control unit of the BLINDS converts data received from the smartphone through

Wi-Fi into respective signals of certain voltage, which are sent to the electric motor.

The motor carries out direct control of mechanisms of the BLINDS.

Manufacturer’s recommendation:

It is necessary to have the updated firmware and application version to ensure the best
performance of the BLINDS.

«
...
20
21
22
23
24
...
»

Summary of Contents for SGV1C80-10-R Series














































Reviews:

No comments

Related manuals for SGV1C80-10-R Series

Brand: Blöcker Pages: 2

Brand: gaviota Pages: 15

NORI 2 LED AW3 RML 2.95x2

Brand: Naterial Pages: 124

Brand: LanternLITE Pages: 16

Brand: Velux Pages: 18

Cordless Faux Wood Blind

Brand: Nien Made Pages: 2

Brand: SI Pages: 16

Brand: MaxxMar Pages: 19

Brand: MaxxMar Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands