SolarGaps SGV1C80-10-R Series, Operation Manual

Page: 19 / 45

EN.19
7.4.4. Connect the motor cable to
a plug from the product delivery
set (see figure to the right)
.
7.4.5. Connect the electric cable to inverter connectors from the product delivery as
follows :
Strip off insulation at the end of each wire.
Slip the plug pin onto the striped wire end .
Crimp the pin using a special tool .
Force the plug onto the pin until you hear a distinctive click. Make sure the pin is
firmly fixed in the plug .
Put the cap onto the plug housing and tighten it firmly .
Slip the socket pin onto the striped wire end .
Crimp the pin using a special tool .
Force the socket onto the pin until you hear a distinctive click. Make sure the pin is
firmly fixed in the socket.
Put the cap onto the socket housing and tighten it firmly .