SolarGaps SGV1C80-10-R Series, Operation Manual

Page: 36 / 45

EN.36
Figure 76
Switch between rooms for manual adjustment of the tilt angle or position of BLINDS
in a specific room ( 7 ).
Use Automation menu (para. 10.13) or Edit tab at the application homepage (para.
10.10) t o remove an operating scenario for the BLINDS in a certain room or rooms.
10.16. Information on Application usage for distributors
Distributors are recommended to create a test account, which contains settings of
typical scenarios (MAX. Efficiency, Night, Morning) and main House settings (number of
blinds, rooms, etc.) to ensure efficient performance and demonstration of all
possibilities of the BLINDS.
The Application is designed so, that the solar panels may be controlled from any
location, though the BLINDS shall be connected to a specific room of a specific House.
If the BLINDS are moved to a new location, they will connect to a new Wi-Fi network,
which is equal to new connection of the BLINDS to the application (see
para. 10.4 .).
WARNING: Reset settings for the showroom sample of the BLINDS ( para. 10.14.2 -
Devices ) before moving it to any other location , otherwise you will not be able to
establish connection in a new location.
11. Transportation rules
11.1. The blinds can be transported to the End User (or storage premises, or a building for
installation) by all means of covered transport, in vertical position with observance of the
handling marks on the packing to avoid physical damages of components and solar
panels.
CAUTION! Take all necessary measures to prevent any physical damage,
deformation or pollution of the product or its components during transportation and/or
storage of the BLINDS.
11.2. Fix the BLINDS for the transportation in a way excluding any possible movement of
the product and its components inside of the transporting vehicles.
12. Storage rules
12.1. The BLINDS shall be stored in a dry closed space in original manufacturer’s packing
at a temperature not lower than +5 ° С .
3
4
5
6
7