EN.12
CAUTION!
The BLINDS contain components supplied by electrical power
(~230 V 50
Hz and ~110 V 60 Hz)
or generating it. Therefore, wiring and connection to the grid shall
be performed by an authorised electrical technician having an appropriate permit.
6.2.
The Buyer is recommended to take into account the following factors prior to
installing the product:
6.2.1.
In case of a new construction, it is desirable to include installation of the BLINDS in
the construction project in advance. In this case all installation and start-up issues will
be settled by the Constructor based on the contract with the End User/Buyer of our
product.
6.2.2.
If a building already exists, it is recommended to order installation of the BLINDS
to companies that have permits (licenses) for such works (including Working At Height
Permit) or appropriately certified personnel.
6.2.3.
If the Buyer intends to install the BLINDS and perform start-up works- to the
highest standard by himself, he will need:
advanced skills of using tools;
personal experience in performing elevated jobs and proper equipment;
favourable climate conditions (temperature, humidity, rain, snow, wind, dust rate,
smoke, natural lighting, etc.).
CAUTION!
All risks during the independent installation and start-up works performed by the
Buyer shall be borne by the Buyer, and the Manufacturer and/or Seller shall bear no
responsibility in this case.
Improper fixing and other installation errors, specifically under extreme
environmental conditions (icing, vibration, etc.) may cause product falling and
result in damage to property, health or even danger to lives of people or animals.
6.3.
The Buyer/End User must choose the BLINDS installation option before ordering the
product model, since it is related to dimensions of the BLINDS. The main installation
options for the product include:
6.3.1.
If the building is already built, the BLINDS
may overlap the face of the building, as follows:
- slotted side guides are fixed at both sides of the aperture;
- the casing is fixed above the aperture.
This layout is easily implemented but is less resistant to external
impacts (natural disasters, vandalism).
6.3.2.
If the BLINDS are installed into the window aperture, a certain
useful light-transmitting window area is lost, as it is shielded by
the casing. Besides, the casing with mechanisms and slotted
side guides become visible from inside. However, this type of
installation is more resistant to external impacts.
6.3.3.
The key factor of optimum installation is compliance of the ordered and received
model of the BLINDS with the chosen installation option.
Summary of Contents for SGV1C80-10-R Series
Page 1: ...VENETIAN BLINDS WITH SOLAR PANELS OPERATION MANUAL EN ...
Page 43: ...EN 43 Annex 2 ...
Page 44: ...EN 44 Annex 3 ...
