EN.39
until cooling down to the operating temperature. Please wait for some time
(approximately 15 minutes) and operation of the BLINDS will resume automatically.
In case of icing of the BLINDS in the winter season, it is strongly recommended to
suspend their operation in order to clean the slats, slotted side guides and mechanisms
from ice.
The control unit of the BLINDS turns off if the grid is deenergized. After restoration of
power supply, the control unit automatically switches on the BLINDS and starts their
operation according to the latest programmed parameters.
18. Warranty obligations
18.1.
The warranty period for the BLINDS makes 24 months from the date of sale of the
product specified in the
Warranty Certificate
. If the date of sale of the product is
missing, the warranty term is calculated from the date of manufacture.
18.2.
The Manufacturer guarantees the operational performance and technical
specifications of the BLINDS, if the conditions of transportation, storage, installation and
operation defined in this Manual will be complied with.
CAUTION!
The warranty obligations of the Manufacturer exclude the following:
battery, even if it is included in the set of the BLINDS;
software installed for the BLINDS, even if that software was sold with the product or
integrated (firmware) into the product, or included into the delivery set;
back-ups of the software and all other data that could be used during the useful life
of the BLINDS. Restoration and re-installation of the mentioned software and data shall
be performed by the End User at his own risk and peril.
WARNING!
The Manufacturer shall not be responsible
for any
losses and/or
damages that
:
might be caused due to potential probable losses and/or damages of the software
and data mentioned above;
might be caused by mobile applications used for control of the BLINDS.
18.3.
In case of need of the warranty service of the BLINDS during the warranty period (a
defect is found), the End User shall send request to [email protected] or use the
Help tab of the application.
NOTE:
First, the End User will receive recommendations and advice for removal of the
failure from the Manufacturer.
In case of a reasonable claim to the product, the Seller will perform all works related
to correction of defects
free of charge
, i.e. at expense of the Manufacturer (visit of
personnel to the End User, if necessary, including costs of spare parts and components).
The expenses related to dismantling, installation and transportation of the damaged
product during the warranty period are not reimbursed to the Buyer.
If a claim is not substantiated, the expenses for trouble-shooting and expert assessment
are paid by the Buyer.
Summary of Contents for SGV1C80-10-R Series
Page 1: ...VENETIAN BLINDS WITH SOLAR PANELS OPERATION MANUAL EN ...
Page 43: ...EN 43 Annex 2 ...
Page 44: ...EN 44 Annex 3 ...