EN.10
5.2.3.
Slotted side guides (2 pcs.) ensure free
motion of slats with solar panels during operation
Figure 5.5. Slotted side guides
5.2.4.
The electronic module installed in the casing
receives commands transmitted by a smartphone
via official application to control electric motor of
the BLINDS, controls output voltage of solar
panels and is connected to power consumption
and accumulation circuit for appliances, which use
the generated power.
Figure 5.6. Electronic module
5.2.5.
The inverter converts generated power from DC to AC (~ 230 V 50 Hz) or
(~ 110 V 60 Hz) used as power supply for the majority of home appliances. Besides, if
needed, it allows connecting these consumers to the external power grid, or vice versa –
supplying the excess generated energy to the grid, which gives the right to respective
compensation according to the law. The connection cable for the inverter is attached
through cable duct QM.
5.2.6.
The battery, which can be incorporated into the BLINDS system, allows optimizing
power supply of the house through redistribution of accumulated and consumed
electrical energy.
The BLINDS are controlled via Wi-Fi by using special mobile application and automatically
adjust the tilt angle of slats with solar panels, while tracking the sun position to ensure the
maximum power generation.
Summary of Contents for SGV1C80-10-R Series
Page 1: ...VENETIAN BLINDS WITH SOLAR PANELS OPERATION MANUAL EN ...
Page 43: ...EN 43 Annex 2 ...
Page 44: ...EN 44 Annex 3 ...
