New Generation Maxx Motors
Cool Motion, Domlux, HWM-10, HWM-20
Operation & Programming Instructions
Command
Key Combination
Description
Illustration
Go Up
Press
UP
Move all the way to the upper
limit
1
Press
LEFT
Press
DOWN
Press
STOP
Move all the way to the lower
limit
1
Stop ongoing motion
Press
RIGHT
Hold
LEFT
for 2 seconds
Hold
RIGHT
for 2 seconds
Press
CHANNEL
Move the motor up in a small
increments
Move the motor up in a small
increments
Move the motor to favourite
position number 1.
Basic Operation - 1 and 5 Channel Remote Controls
Go Down
Stop
Step Up
Step Down
Go to Favourite
Position #1
Go to Favourite
Position #2
Next
Channel
2
Move the motor to favourite
position number 2.
Cycle to the next channel (or
group of channels) on the
remote, making it active.
1. The motor will stop on button release if the limit is not yet set.
2. This command is not sent to the motor, and affects only the remote control on which it is executed.
Note:
Unless noted, all commands are sent
from a remote control to a motor, and
will only have effect if the remote
control's active channel has been
paired with the desired motor.
1and 5 Channel Remote Control Specifications
(Models: RC-215, RC-230)
Transmission power: 10dBm
ASK 433.92MHz wireless transmission
Outdoor transmission distance: 200m
Indoor transmission distance: 35m
Working temperature: -20°C- +55°C
Battery model: CR2450
