WATTrouter M - user manual
How to fit and setup the device
Page 75 from 79
MAINTENANCE AND REPA IRS
The WATTrouter M devices have been designed as maintenance-free units, provided that they were configured
and fitted according to instructions specified in this manual. We recommend inspecting the operation of the
entire system at regular intervals (at least once in a month, for example, when inspecting the status of the PV-
plant). Focus mainly on the load switching process and heat dissipation.
Should you discover a defect which cannot be repaired according to instructions specified in the
Troubleshooting chapter, contact your distributor (applies both to warranty and post warranty repairs).
Defect on current sensing module is very unlikely to occur. In case of a defective regulator, you can send only
the regulator for repair or replacement. The current sensing module may still remain fitted without the
regulator. Even if electric currents flow through measuring coils, the module will not be damaged.
Never attempt to repair your device by yourself! If you do so, you are putting yourself at risk of electric
shock. Further, your entire warranty will be void!
