Solar-Log 1200 User Manual Download Page 84

Page: 84 / 158

Operating the Solar-Log 500 and 1000 via the Display

5.6 Using Data Transfer with USB

If your Solar-Log 1000 is not connected to a local area network (LAN), you can use a USB stick to transfer

data, event logs and settings.

The USB connection is located at the top of the Solar-Log 1000 underneath the cover. You also need a

USB stick with the FAT32 format (USB 2.0).

•

Remove the cover from the top of the case by pulling it forward and plug the USB stick in the port

labeled USB.

5.6.1 Create a Backup

You can also use a USB stick to create a backup. You have the following selection possibilities:

•

Save the yield and settings data or

•

copy yield data saved on the USB stick to the device or

•

copy settings saved on the USB stick to the device.

Important:

When importing data from the USB stick, all of the data on the device is deleted

and replaced.

Tap

your finger on the display again.

The main navigation screen is displayed.

Tap

Diagnosis

and then on

Backup.

Fig.: USB Backup Selection Menu

Select the desired

Option

Summary of Contents for 1200































































































































































Search results

Summary of Contents for 1200

Reviews:

Related manuals for 1200

Brands by name

Popular brands

Solar-Log 1200, User Manual

Search results

Summary of Contents for 1200

Reviews:

Related manuals for 1200

Brands by name

Popular brands